The Central Machinery 3-1/2 Cubic ft Cement Mixer is a portable mixer that handles stucco, mortar or concrete. The drum rotates at 36 RPM powered by a 1/3 hp electric motor. You can easily roll the mixer around using its two front wheels.
Constructed of solid steel, this mixer is great for both construction and farm applications such as seed inoculation or mixing feed. Whether working on the farm, construction site or in your backyard, this versatile cement mixer handles just about any mixing job!
Warning: Do not mix epoxy in this machine, it will seap into the bearings and dry.
- General duty cement mixer handles stucco, mortar and concrete
- Large 9 in. wheels for easy maneuverability
- All-steel unit for construction and farm use
- Wide 15 in. drum opening
- Switch with safety lock
Harbor Freight will guarantee the cement mixer to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.
This tool works great but the assembly instructions are lacking. The assembly is not hard but there are a lot of parts and figuring out how everything goes together is not fully explained in the instructions.
A few things to understand during assembly. Each bolt comes with one washer and one nut. The nuts have built-in self-locking washers. So when assembling put the washer on the bolt and the bolt through the hole then the nut on.
The instructions call to use gasket sealer on the bottom side of the gasket to hold it in place while you line up the top half of the drum. I did not do that because it’s quite messy and a cement mixer does not need gasket sealer.
The drum has an arrow sticker on the top and bottom half of the drum to show you where to join the drum halves so the mixing blades can be bolted on. My stickers were not placed in the correct position and when I tried to bolt on the mixing blades it would not line up with the holes. I had to take the top drum off and move it to align the blade holes.
The mixing blades can be put on upsidedown and the instructions do not show this step. The blades have one end that comes to a point and one end that is square. The pointed end goes down and the squared end goes up. Also, the bolts that hold the mixing blades to the inside of the drum should be placed from the inside with the nut on the outside of the drum. This will prevent cement from drying on the threads and enable you to remove the bolts later if needed.
Once the mixer is assembled the only other warning we have is to put some water into the mixer before adding cement. If you put in the dry mix then add water it does not mix the bottom and you can end up with dry mix at the bottom.
This machine is very durable. We were able to find an owner that had his machine for 10 years and said it still working like new.
Although it’s a well-designed tool, a few design changes would have made this machine stronger with minimal added weight and cost. Four legs instead of three would make it more stable. Full box leg extensions instead of U-beams would add strength to the legs.